Showing posts with label solidworks 2015. Show all posts
Showing posts with label solidworks 2015. Show all posts

July 8, 2015

Surfacing Tool in SOLIDWORKS

Simple Surface

Basic geometric shapes such as cubes and cylinders are easily defined however; 3D CAD software can do much more.  When a designer takes advantage of the 3D software capabilities, more complex shapes may be created and defined. 
  Consider a complex feature such as a compound curve.  Compound curves may be defined in SolidWorks using the surfacing tool.  In order to define this curve it must be constrained using three sketches.  The image below contains a sketched curve on the Front, Right and Top Plane.  Please note that the curve is sketched in a solid line whereas parts that do not define the curve are kept as construction lines.

solidworks surfacing
















Each curve may be modified to suit your chosen geometry.  The numerical values in this example are arbitrary however note that each curve shares a termination point from start to finish.

solidworks surface tool
















Next, activate the surfaces tab and select the boundary surface tool.  This tool creates a surface within the bounded conditions.  In this case the bounded conditions will be the sketches.  Under Direction 1 tab, select the two sketches on the Right and Front Plane.

solidworks surface tool















Please note that the curve as shown is incomplete since the surface is only bound by the two sketches as reflected in the preview.  The bottom edge of the surface needs to follow the contour as outlined on the Top plane sketch.  To do so, activate Direction 2 and select the top plane sketch.

surface tool solidworks















Now the compound curve is properly bound by all three sketches.  We may now accept and apply this feature

surface tool
















A fully defined compound curve surface is now defined.  This surface may now be used to complete a part or work as a simplified model for an FEA analysis.  The tools to create 3D parts such as compound curves are all available in SolidWorks.





May 5, 2015

SOLIDWORKS 2015 SALE!

BUY SOLIDWORKS AND GET AN ADDITIONAL 

SOLIDWORKS ADD-ON LICENSE AT NO COST


From now through May 31, 2015 extend your design capabilities by including one additional SOLIDWORKS product license at no cost*.
SOLIDWORKS has a solution for every stage of your design process, allowing you to be more productive and efficient. 
This special offer makes purchasing a SOLIDWORKS Professional or SOLIDWORKS Premium license an even smarter buying decision.  Select the best add on product for your designing needs.  

For each new SOLIDWORKS Professional license purchased – add one of the following licenses:
  • SOLIDWORKS Enterprise PDM CAD Editor – manage and share product data more effectively and automate workflow to allow better collaboration between all departments
  • SOLIDWORKS Model Based Definition – offers an integrated drawing–less manufacturing solution
  • SOLIDWORKS Inspection – streamlines the inspection documentation process
For each new SOLIDWORKS Premium license purchased – add one of the following licenses:
  • SOLIDWORKS Composer – leverage 3D CAD data to create dynamic graphical content
  • SOLIDWORKS Plastics Standard – easy to use, injection molded simulation
  • SOLIDWORKS Electrical 2D or 3D– simplifies development of embedded electrical systems for products
GET STARTED TODAY!



*Offer valid from May 1 - 31, 2015 in the U.S. Canada and Mexico only. Offer expires May 31, 2015 at 11:59pm Eastern Daylight Time and cannot be combined with any other discount or offer. Only newly acquired licenses ordered after 12:00 am Eastern Daylight Time on May 1, 2015 are eligible. Educational and Research licenses do not qualify for this offer. Subscription Service must be purchased for one-year at full price on each new SOLIDWORKS Professional or SOLIDWORKS Premium license as well as full one-year subscription price on additional no cost product license(s) outlined in this offer. Other restrictions may apply. Contact FEA Training Consultants Inc. for more information.

April 29, 2015

How to import STEP file in SOLIDWORKS?

Importing STEP file in SOLIDWORKS

Working in industry involves communication with clients, contractors, etc.  From a computer aided design (CAD) perspective it means being able to exchange and use models from different software platforms.  A common question we receive is SolidWorks compatibility with other software packages. 

For example, assume a client uses a different CAD system and has sent us a *.step file containing the part model.  In this case the part is a base plate.  In order to open the part in SolidWorks we must import the part and use feature recognition.

Select File>Open and browse for the *.step file to open it.

A pop-up window will appear asking to create a new SolidWorks part.  Select yes to accept

import STEP file  in solidworks



















A new pop-up window will appear asking whether you would like to run import diagnostics.

solidworks file imports





















Import diagnostics checks the part model for errors.  By selecting OK, the Import Diagnostics ran on our part and did not detect any errors.

solidworks import





















Further, you will be prompted whether you want to run Feature Recognition.  

SolidWorks Feature Recognition(FEATUREWORKS)





















Feature Recognition will attempt to construct the model using Solidworks features and tools.  If you chose not to run feature recognition, the part will exist as a single solid body model.  By accepting Feature Recognition and running it, the part is now deconstructed into a sketch and an extrude boss command.

FeatureWorks





















importing STEP file in solidworks






















By inspecting the sketch you’ll find undefined entities used to create the solid body.


sketch model in solidworks






















Please note that there are many import and export options for SolidWorks.  All import and export options are summarized in the table below:

import and export options in solidworks







































import STEP FILE IN SOLIDWORKS


March 2, 2015

Drawing Zones- New in SolidWorks 2015

In SolidWorks 2015, you can define drawing sheet zones on a sheet format for the purpose of providing locations where drawing views and annotations reside on the drawing.

Defining Drawing Sheet Zones

To define drawing sheet zones in the sheet format:

1. In a drawing, do one of the following:
·  Click Edit > Sheet Format.
·  Right-click any blank area on the drawing sheet and click Edit Sheet Format.
· Right-click the sheet icon in the FeatureManager design tree and select Edit    Sheet Format.
2. Right-click the sheet format icon in the FeatureManager design tree, any blank area of the drawing sheet, or the sheet tab at the bottom of the drawing window, and select Properties.
3. In the Sheet Properties dialog box, click the Zone Parameters tab.
4. Set the options.

5. Click OK.



































To show or hide drawing zone lines, click View > Zone Lines

drawing zone



























Adding Zones to Annotations

You can use annotation notes and balloons to identify which drawing zone they are in. As you move an annotation in the graphics area, the drawing zone updates to the current zone.

To add zone information to an annotation note or balloon:

1. Create an annotation note or balloon and place it on the drawing sheet. If you create a balloon, the Balloon text must be set to Text.
2. In the annotation note or balloon, double-clicking the text to edit it.
3. In the text field, move the insertion point to the location where you want to insert the zone in the text.
4. In the Note PropertyManager, under Text Format, click Add Zone.
5. In the Add Zone dialog box, select one:
·         Zone Inserts column and row
·         Zone Column Inserts only column
·         Zone Row Inserts only row
·         Drawing View Inserts selected drawing view row and column
6. Click OK.


drawing zone in solidworks






















Location Labels for Views
You can place location labels on detail, section, and auxiliary drawings views to provide the sheet and zone location for the parent view. Additionally, you can place location labels on detail circles, section cutting lines, and auxiliary view arrows to provide the location of the corresponding child view.
In this section view example, it shows the parent view and the child view. The zone is determined by the centroid of the view. The location label on the parent view shows where the child view is located, Zone A1. The location label on the child view shows where the parent is located, Zone A2.

Setting Options for Location Labels
To set document properties for Location Labels:
1. Click Options (Standard toolbar) or Tools > Options.
2. On the Document Properties tab, click Annotations > Location Label.
3. Set the properties.
4. Click OK.

























Using Location Labels

Adding a Location Label to a Child View
To add a location label to a child view in a section, detail, or auxiliary view:
1. In a drawing, create the view. You can also move the child view to a sheet that is different than the parent view.
2. Click Insert > Annotations > Location Label.
3. In the Location Label PropertyManager, set the options.
4. Click the child view.
5. Click OK.

solidworks drawing
























Adding a Location Label to a Parent View
To add a location label to a section cutting line, detail circle, or view arrow in a parent view:
1. In a drawing, create a section, detail, or auxiliary view.
2. Click Insert > Annotations > Location Label.
3. In the Location Label PropertyManager, set the options.
4. In the parent view, click on the section cutting line, detail circle, or view arrow.
5. Click OK.

location label drawing zone