Update Standard Views
You can update standard views from the
Orientation dialog box (Shortcut - Spacebar) or by using the menu options. If
you have imported a part or started a design and then want to change the part’s
orientation to better fit with your overall design you can use the below
method.
You can also update standard views without
using the Orientation dialog box by clicking View > Set Current View As and
selecting the desired view.
We will go through this using the below model
for which we want to make the Right view orientation to be the Front view
orientation. Below are the images of Isometric and Front View of the model.
Isometric View
Front View
To update standard views from the Orientation
dialog box (Keyboard shortcut to get orientation dialog box is Spacebar), do
one of the following:
1.
Use the Rotate, Zoom, and Pan tools to orient the model.
2.
Click View Selector and select a view.
3.
Select a view from the Orientation dialog box.
We orient the model in Right view and Click
Update Standard Views as shown below.
When prompted, select the standard view you
want to assign the current view to. In our case we select the Front View since
we want to make the below orientation Front view of the model.
It will ask you to confirm the update - say 'yes' in the dialog box
The model changes the Standard views and below
are the images of Isometric and Front View of the model.
Isometric View
Front View
For any reason you want to reset the view
orientation, use the Reset Standard Views option as shown below.
No comments:
Post a Comment